BSNL EVDO CLUB Forum - UnOfficial

(09-10-2008 07:10 AM)veagles Wrote: Guests cannot see links in the messages. Please register in our forum for free by clicking here to see links.

(09-07-2008 07:31 PM)Devendraa Wrote: Guests cannot see links in the messages. Please register in our forum for free by clicking here to see links.hi veagles my mistake .... did not read the full thread .... read did as directed on cd install etc. now its working ... speed is fine a little slow I FEEL maybe its good since do not have comparison ..... Thanks buddy just one thing ... i use leapord and the triangle i see on the top menu when i click it ... it says card not detected although still running but is there a worry sign here or is it ok ...? please enlighten me on this ............. BUT YES THANKS BRO it was neat job ,rock on BRO

That triangle is supposed to display your evdo signal, if you have the proper drivers. I get that empty triangle too. If it bothers you, then you can delete wwan.menu file from your core services directory. It will go away.Guests cannot see images in the messages. Please register in our forum for free by clicking here to see images.

---

(09-09-2008 11:16 PM)anandshah Wrote: Guests cannot see links in the messages. Please register in our forum for free by clicking here to see links.

(08-26-2008 04:36 PM)veagles Wrote: Guests cannot see links in the messages. Please register in our forum for free by clicking here to see links.You need to change the hardware id in the script.

change it to what?


My Product ID - 0x3197
My Vendor id - 0x05c6

Convert it to decimal and replace the ones in the script.

Don't know how to convert but I'll try .

Thanks a lot for your help . will keep you posted of the progress

How do we convert decimal

Please help

regards
anand shah

thanks veagle, its working fine for me in hyderabad n secunderabad

Anyone has made Reliance ZTE modem work on Mac OS 10.4 / 10.5?

Hi Veagles, your script and knowledge have been of trememndous help. Let me ask you a few minor details, though, which I need to clarify....

1. I've seen you suggest that the cdma/novatel script is faster than the prolific method, but I was just wondering if this was absolutely confirmeed or perhaps different in different areas.

2. In your network preferences pane, are you automatically supplied with a WINS name and server.

3. Do you use vpn on top of it? Or maybe the 802.11 authentication?.

4. Is there any way on hte mac itself to identify how many bars there are similar to as you can do in windows, and more importantly whether you are on evdo or you are on 1x?

Thanks for your time and I appreciate al the help you've done .

Hi, Veagles
how do you know the hardware id and product id of the evdo we are using

For the modems with My Product ID - 0x3197
My Vendor id - 0x05c6

i have modified the script and it works on OSx leopard

need it email me will send it accross.

regadrs
anand shah
anand at anandshah dot in

(09-22-2008 01:52 PM)anandshah Wrote: Guests cannot see links in the messages. Please register in our forum for free by clicking here to see links.For the modems with My Product ID - 0x3197
My Vendor id - 0x05c6

i have modified the script and it works on OSx leopard

need it email me will send it accross.

regadrs
anand shah
anand at anandshah dot in

mr anandshah if its not worked with u plz follow me in msn[koja_tt@hotmail.com] or just send me an email in m_alnaeem@yahoo.com .. ready to help

(05-29-2008 02:57 PM)veagles Wrote: Guests cannot see links in the messages. Please register in our forum for free by clicking here to see links.Ok. Here is a different approach. This method is dead easy compared to the previous one. All you need to do is run a shell script. If you have installed the pl2303 drivers, then remove them before you proceed.

Code:

~<Username>$ sudo -s
bash-3.2# kextunload /System/Library/Extensions/osx-pl2303.kext/
bash-3.2# rm -r /System/Library/Extensions/osx-pl2303.kext/
bash-3.2# rm -r /Library/Receipts/osx-pl2303.pkg/

Reboot

1. Download this file from mediafire.
Guests cannot see links in the messages. Please register in our forum for free by clicking here to see links.

2. Extract to your root partition, which is usually Mac HD. Execute these command in the terminal.

Code:

~<Username>$ sudo -s
bash-3.2# cd /
bash-3.2# ls

You should see the Install folder here.

Code:

bash-3.2# cd Install
bash-3.2# sh Install.sh

Reboot

Open Network preferences, you should be able to see ZTE CDMA Tech as one the connections. Enter your bsnl number and select Vendor as Novatel and Model as cdma from advanced tab.

The script is for ZTE AC8700 modems with hardware id 0c56:6000. The numbers 24576 and 1478 in the script correspond to the above id. You would have to change it if you have a different hardware id.

Connect and Surf!

Leave a reply if it works for you.

Thanks man . do u have any such steps for Reliance NEtconnect ZTE M 880

Hey, any final word on what the best driver is for the new shell script veagles made? Also, to those of you have had the chance both Prolific driver and Veagle's Script, which is better?

I realize this thread seems pretty dead, but its really the only one on the net with anything even remotely informative to say about the zte mac evdo issue.

Well, let me know.