Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
which password should i enter after the sudo -s command
I have a zte evdo and am trying to configure the same for my mac. Which password should i enter after the sudo -s command.
your tutorial says to use password that was used to create account, which account is this. kindly reply
(08-21-2008 10:51 AM)pachiEVDO Wrote: Guests cannot see links in the messages. Please register in our forum for free by clicking here to see links.In the latest 10.5.4, we have one more
AppleWWANSupport2.kext exists, does this need any changes to Install.sh
Thanks
That file has been there since the first release of leopard.
(08-22-2008 12:10 AM)venkatesh Wrote: Guests cannot see links in the messages. Please register in our forum for free by clicking here to see links.which password should i enter after the sudo -s command
I have a zte evdo and am trying to configure the same for my mac. Which password should i enter after the sudo -s command.
your tutorial says to use password that was used to create account, which account is this. kindly reply
The password of your user account in your mac.
how long it take for bsnl to deliver the evdo? i booked it last week.
I got it at time of booking..
hI,
just got evdo yesterday.
For Mac OSX Leopard, how to know the hardware id of the evdo ( AC8700 )
Detected in System Profiler as ZTE CDMA Tech ( under USB )
MY pID SAYS 0x3197
MY vID SAYS 0x05c6
Do I still use the script you mentioned or do I change it?
Thanx in advance,
Sundance
(05-29-2008 02:57 PM)veagles Wrote: Guests cannot see links in the messages. Please register in our forum for free by clicking here to see links.Ok. Here is a different approach. This method is dead easy compared to the previous one. All you need to do is run a shell script. If you have installed the pl2303 drivers, then remove them before you proceed.
Code:
~<Username>$ sudo -s
bash-3.2# kextunload /System/Library/Extensions/osx-pl2303.kext/
bash-3.2# rm -r /System/Library/Extensions/osx-pl2303.kext/
bash-3.2# rm -r /Library/Receipts/osx-pl2303.pkg/
Reboot
1. Download this file from mediafire.
Guests cannot see links in the messages. Please register in our forum for free by clicking here to see links.
2. Extract to your root partition, which is usually Mac HD. Execute these command in the terminal.
Code:
~<Username>$ sudo -s
bash-3.2# cd /
bash-3.2# ls
You should see the Install folder here.
Code:
bash-3.2# cd Install
bash-3.2# sh Install.sh
Reboot
Open Network preferences, you should be able to see ZTE CDMA Tech as one the connections. Enter your bsnl number and select Vendor as Novatel and Model as cdma from advanced tab.
The script is for ZTE AC8700 modems with hardware id 0c56:6000. The numbers 24576 and 1478 in the script correspond to the above id. You would have to change it if you have a different hardware id.
Connect and Surf!
Leave a reply if it works for you.
Hello,
I installed using the Install.sh script.
The device shows up in System Profiler as ZTE cdma under USB.
However when I open Network Preferences and try adding the device, it does not show up in the list of connections.
My Product ID - 0x3197
My Vendor id - 0x05c6
Is there anything else I need to do?
Thanks
Sundance.
(05-29-2008 02:57 PM)veagles Wrote: Guests cannot see links in the messages. Please register in our forum for free by clicking here to see links.Ok. Here is a different approach. This method is dead easy compared to the previous one. All you need to do is run a shell script. If you have installed the pl2303 drivers, then remove them before you proceed.
Code:
~<Username>$ sudo -s
bash-3.2# kextunload /System/Library/Extensions/osx-pl2303.kext/
bash-3.2# rm -r /System/Library/Extensions/osx-pl2303.kext/
bash-3.2# rm -r /Library/Receipts/osx-pl2303.pkg/
Reboot
1. Download this file from mediafire.
Guests cannot see links in the messages. Please register in our forum for free by clicking here to see links.
2. Extract to your root partition, which is usually Mac HD. Execute these command in the terminal.
Code:
~<Username>$ sudo -s
bash-3.2# cd /
bash-3.2# ls
You should see the Install folder here.
Code:
bash-3.2# cd Install
bash-3.2# sh Install.sh
Reboot
Open Network preferences, you should be able to see ZTE CDMA Tech as one the connections. Enter your bsnl number and select Vendor as Novatel and Model as cdma from advanced tab.
The script is for ZTE AC8700 modems with hardware id 0c56:6000. The numbers 24576 and 1478 in the script correspond to the above id. You would have to change it if you have a different hardware id.
Connect and Surf!
Leave a reply if it works for you.
You need to change the hardware id in the script.
Hi veagles,
I cannot see the pictures you post.
Can you post those pictures again?
(06-02-2008 08:38 AM)veagles Wrote: Guests cannot see links in the messages. Please register in our forum for free by clicking here to see links.The list which you have shown is a list of modem scripts that are present in your mac. A modem script is used to dial a modem. It is NOT a list of installed modem drivers. You are not supposed to look here.
ZTE CDMA Tech must appear in Internet connect in the top bar where you have bluetooth, 802.11 etc.
This is what i could get from novatel suppport. Hope it helps..
Go to Network.
Guests cannot see images in the messages. Please register in our forum for free by clicking here to see images.
You should have ZTE CDMA Tech here.
Guests cannot see images in the messages. Please register in our forum for free by clicking here to see images.
Configure it.
Guests cannot see images in the messages. Please register in our forum for free by clicking here to see images.
Select any Novatel or verizon or sprint script here.
Guests cannot see images in the messages. Please register in our forum for free by clicking here to see images.
Looks like they got deleted.. Anyways, They were not of much use.
hi Veagles!
i got my evdo card n it says AC8700 800M.
hay thxs for ur settings but i done ur 1st config n uninstalled n installed 2nd config.
i both am getting same speed. n its very slow, n dead slow. i took ages to load this page for me. dono wat to do. can u suggest something for me?
hi Veagles!
i got my evdo card n it says AC8700 800M.
hay thxs for ur settings but i done ur 1st config n uninstalled n installed 2nd config.
i both am getting same speed. n its very slow, n dead slow. i took ages to load this page for me. dono wat to do. can u suggest something for me?
Check the speeds in windows. Everyone is experiencing slow speeds these days.
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18